NEXV ANALOG VTX / AL5810
4.9–6.0GHz 10W Analog VTX
High-power wideband VTX with multi-step output power control and active cooling.
4.9–6.0 GHz80 CHPIT / 1W / 2.5W / 5W / 7.5W / 10W
Request wholesale information ↗
TECHNICAL SPECIFICATIONS
Product data.
Specifications shown are transcribed from the supplied product datasheet. Confirm the current revision before purchase.
| Frequency range | 4990–5945 MHz |
|---|---|
| Output power | PIT / 1W / 2.5W / 5W / 7.5W / 10W |
| Channels | 80 CH |
| Input voltage | DC 9–36V (2–8S) |
| Modulation | FM |
| Frequency control | PLL |
| Control protocol | IRC Tramp |
| Video input level | 1V ±0.2Vp-p (typ.) |
| S/N ratio | >55dBc (±3MHz) |
| Antenna connector | SMA 50Ω |
| Operating temperature | −10°C to +70°C |
| Dimensions | 66 × 37 × 16 mm (20 × 20 mounting holes) |
| Weight | 48 g |
DESIGN & FEATURES
Key highlights.
0180 channels across 4990–5945MHz
02Selectable PIT, 1W, 2.5W, 5W, 7.5W and 10W levels
03RGB status indicators for power, channel and band
04IRC Tramp control supported
INSTALLATION & SOURCE NOTES
Connect an antenna before powering the transmitter. When the Tramp cable is connected, flight-controller control takes over frequency and power settings.
Radio frequency and output-power rules vary by market. Verify local regulations, required approvals and operating conditions before importing, selling or using this transmitter.
Compare all models ↗